Once ZHA has been set up and the Zigbee Coordinator radio adapter or module is configured, you will be able to directly join/pair any Zigbee device to the Zigbee network regardless of the manufacturer and brand of that Zigbee-based product. The ZHA integration can work with many different “Zigbee Coordinator” adapters, however, be sure to read the respective sections below about compatible Zigbee radio adapters and hardware modules. In the case of ZHA, the Zigbee Coordinator is a radio adapter or hardware module, that contains a microcontroller that runs the Zigbee protocol stack which the ZHA integration uses to manage and communicate with a Zigbee network and its devices.īefore installing the ZHA integration, you will need to buy and connect a Zigbee Coordinator radio adapter or hardware module, those usually come in the form of a USB dongle that plugs directly into the computer that is running the Home Assistant installation. Zigbee Router devices are mains-powered and will act as Zigbee signal repeaters within the Zigbee network mesh to extend its range and improve coverage, while Zigbee End Device devices are usually battery-operated sensors that will not act as Zigbee signal repeaters.
It acts as a physical interface for the Zigbee wireless protocol, as well as being responsible for maintaining the Zigbee network topology and ensuring secure and efficient communication between Zigbee devices. A Zigbee network always has one (and no more) Zigbee Coordinator, however, a Zigbee network can have multiple Zigbee Routers and multiple Zigbee End Devices.Ī Zigbee Coordinator is the central device in a Zigbee network that manages and controls the network. In Zigbee, there are three different device types: Zigbee Coordinator (ZC), Zigbee Router (ZR), and Zigbee End Device (ZED). ZHA integration is a Zigbee gateway implementation that follows the standard Zigbee 3.0 specification (and earlier revisions). As well as support for binding/unbinding (i.e. At least two entities must be added to a group before the group entity is created. support for commanding device groups as entities). There is also support for grouping of lights, switches, and fans (i.e. There is currently support for the following device types within Home Assistant: All coordinators compatible with zigpy can be used with ZHA. ZHA uses an open-source Python library implementing a hardware-independent Zigbee stack called zigpy. The ZHA (Zigbee Home Automation) integration allows you to connect many off-the-shelf Zigbee based devices directly to Home Assistant, using one of the many available Zigbee coordinators.
0 kommentar(er)
